Search results

This paper is devoted to prepare micro-cone structure with variable cross-section size by Stereo Lithography Appearance (SLA)-based 3D additive manufacturing technology. It is mainly focused on analyzing the forming mechanism of equipment and factors affecting the forming quality and accuracy, investigating the influence of forming process parameters on the printing quality and optimization of the printing quality. This study is expected to provide a µ-SLA surface preparation technology and process parameters selection with low cost, high precision and short preparation period for microstructure forming.

The µ-SLA process is optimized based on the variable cross-section micro-cone structure printing. Multi-index analysis method was used to analyze the influence of process parameters. The process parameter influencing order is determined and validated with flawless micro array structure.

After the optimization analysis of the top diameter size, the bottom diameter size and the overall height, the influence order of the printing process parameters on the quality of the micro-cone forming is: exposure time (B), print layer thickness (A) and number of vibrations (C). The optimal scheme is A1B3C1, that is, the layer thickness of 5 µm, the exposure time of 3000 ms and the vibration of 64x. At this time, the cone structure with the bottom diameter of 50 µm and the cone angle of 5° could obtain a better surface structure.

This study is expected to provide a µ-SLA surface preparation technology and process parameters selection with low cost, high precision and short preparation period for microstructure forming.

This study aims to explore the gap between information needs and services for autism in China.

The gap is revealed by investigating the status quo of autism information needs and services. The authors extracted categories and subcategories of information needs through content analysis of academic documents and then supplemented the subcategories through text mining of an online forum. Meanwhile, categories and subcategories of information services were extracted through content analysis of autism websites. Finally, the authors matched the two to explore the gap and designed a quantitative index to measure it.

A total of eight and ten categories of information needs and services are extracted, respectively. In total, six categories of information needs can be partly matched, but nearly half of the subcategories failed. Huge gaps in economic support, sociality and policy mechanisms categories are observed through the quantitative index and medium gaps in social resource services and employment categories while almost no gaps in psychological/emotional counseling, rehabilitation skills training and professional knowledge/information categories.

This study takes a deep insight into the gap between autism information needs and services in China, providing evidences and suggestions for information providers to improve their services. Academic documents and online forum data are adopted to avoid the impact of stigmatization, which provides a multi-source data analysis approach for the information needs of special groups.

The simulated temperature profile of the printed circuit board assembly (PCBA) during reflow soldering process deviates from the actual profile. To reduce this relative deviation, a new strategy based on the Kriging response surface and the Multi-Objective Genetic Algorithm (MOGA) optimizing method is proposed.

The simulated temperature profile of the PCBA during reflow soldering process deviates from the actual profile. To reduce this relative deviation, a new strategy based on the Kriging response surface and the MOGA optimizing method is proposed.

Several critical influencing parameters such as temperature and the convective heat transfer coefficient of the specific temperature zones are selected as the correction parameters. The hyper Latins sampling method is implemented to distribute the design points, and the Kriging response surface model of the soldering process is constructed. The updated model is achieved and validated by the test. The relative derivation is reduced from the initial value of 43.4%–11.8% in terms of the time above the liquidus line.

A new strategy based on the Kriging response surface and the MOGA optimizing method is proposed.

In the face of solving the urban traffic congestion problem radically, emphasis has been laid on the research on slow traffic planning of urban built environment. Hence, research on slow traffic demand forecasting can provide a basis for the planning of urban slow traffic systems. Based on land use, the overall planning of the new Guangming (GM) district, and the population prediction results, the slow traffic demand within the scope of the new district was forecasted by combining the per capita trip frequency, and the spatial distribution of the slow traffic flow of the new GM district was forecasted per the forecasted demand quantity for slow traffic. The following research conclusions were obtained. Within the new GM district, the correlation of the total demand for slow traffic with the land use functions and population distribution was high, and the cross-zone traffic was mainly decided by the land usage of this district. The cross-unit slow traffic flow was concentrated in the Gongming central, Guangming central, high-tech zone, and Yutian zones. This research provides a guideline for the layout of slow traffic facilities in the future.

In this paper the aim is that Aramid/alginate blended nonwoven fabrics were prepared, and the flame retardancy of the blended nonwoven fabrics was studied by thermogravimetric analysis, vertical flame test, limiting oxygen index (LOI) and cone calorimeter test.

The advantages of different fibers can be combined by blending, and the defects may be remedied. The study investigates whether incorporating alginate fibers into aramid fibers can enhance the flame retardancy and reduce the smoke production of prepared aramid/alginate blended nonwoven fabrics.

Thermogravimetric analysis indicated that alginate fibers could effectively inhibit the combustion performance of aramid fibers at a higher temperature zone, leaving more residual chars for heat isolation. And vertical flame test, LOI and cone calorimeter test testified that the incorporation of alginate fibers improved the flame retardancy and fire behaviors. When the ratio of alginate fibers for aramid/alginate blended nonwoven fabrics reached 80%, the incorporation of alginate fibers could notably decreased peak-heat release rate (54%), total heat release (THR) (29%), peak-smoke production rate (93%) and total smoke production (86%). What is more, the lower smoke production rate and lower THR of the blends vastly reduced the risk of secondary injury in fires.

This study proposes to inhibit the flue gas release of aramid fiber and enhance the flame retardant by mixing with alginate fiber, and proposes that alginate fiber can be used as a biological smoke inhibitor, as well as a flame retardant for aramid fiber.

The purpose of this study is to investigate the effect of chlorination on the structure and properties of reclaimed rubber and to discuss the feasibility of a novel method to chlorinate reclaimed rubber.

A series of chlorinated reclaimed rubber with different chlorination degrees (CD) was prepared by suspension chlorination in aqueous phase (SCAP). Their structure and performance were characterized by Fourier transform infrared spectrometer, energy dispersive spectroscopy, scanning electron microscopy, thermogravimetric and mechanical property test.

The chemistry structure, mechanical performance and heat resistance of CRR is affected greatly by its CD.

Although in the present work only chlorination of reclaimed rubber is researched, but this method can be used to modify other recycled rubber.

SCAP is a useful method to produce CRR, and it is feasible for production of chlorinated recycled rubber in large scale. The present work provides a new strategy to fabricate new materials based on recycled rubber.

Chlorination of reclaimed rubber by SCAP is useful to convert waste rubber into new materials, and it is useful to decrease environment pollution.

SCAP method provides a new technology to chlorinate waste rubber with many merits, such as chlorination rate of RR is accelerated and the reaction can be controlled or adjusted easily. Moreover, conversion of chlorine is increased remarkably.